Description
500 Amp magnetic latching switch provides high amperage switching under load, manually or from remote locations
- Manual override knob provides an added level of safety allowing control with or without power and offering LOCKED OFF capability for servicing
- LED output to remotely indicate switch state - requires optional LED
- 3 8"-16 tin-plated copper studs for maximum conductivity and corrosion resistance
- 7 8" (22 mm) stud length accepts multiple cable terminals
- Label recesses for circuit identification
- Silver alloy contacts provide high reliability for switching live loads
Specifications
| Control Circuit Voltage | 18-32V DC
|
| Control Circuit Connection | Tinned Wire
|
| Nominal Voltage | 24V DC
|
| Manual Control | Yes
|
| Coil Function | Bi-Stable
|
| Mounting | #10
|
| Amperage Operating Current | 0mA
|
| Amperage Operating Current when changing state | <4A (40 ms)
|
| Terminal Stud Torque | 140 in-lb (15.82 Nm)
|
| Continuous Rating | 500A
|
| Intermittent Rating | 700A (5 min)
|
| Cranking Rating 30 sec | 1450A DC
|
| Minimum Operating Temperature | -10 C
|
| Maximum Operating Temperature | 60 C
|
| Cable Size to Meet Ratings | 2x (4/0)
|
| Live Current Switching | 300A @ 12V DC
|
| Master Control Switch Capability | No
|
| Mechanical Endurance | 100,000 Cycles
|
| Terminal Ring Diameter Clearance | 1.18in (29.97 mm)
|
| Terminal Stud Length | 0.875in (22.23 mm)
|
| Terminal Stud Size | 3/8" - 16 (M10)
|
| Weight | 5.0lbs |
(7702)
